Bambu Lab X1 / P1 Spare Sheet for Bambu High Temperature Plate

Compatibility:

• X1 Series and P1 Series.

Note:

• The Bambu High-Temperature sheet is easy to replace and install.
• After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.
• You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.
• You can also use detergent and water to clean the surface.
• It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.

Recommended Settings for Bambu High-Temperature Plate:

• PLA/PLA-CF/PLA-GF: Hotbed Temperature: 45~60℃, Glue Stick Required: Recommended, Upper Glass Cover Plate Removed: Yes
• ABS: Hotbed Temperature: 90~100℃, Glue Stick Required: Recommended, Upper Glass Cover Plate Removed: No
• PETG: Hotbed Temperature: 80℃, Glue Stick Required: Yes, Upper Glass Cover Plate Removed: Yes
• TPU: Hotbed Temperature: 35℃, Glue Stick Required: Recommended, Upper Glass Cover Plate Removed: Yes
• ASA: Hotbed Temperature: 90~100℃, Glue Stick Required: Recommended, Upper Glass Cover Plate Removed: No
• PVA: Hotbed Temperature: 45~60℃, Glue Stick Required: Recommended, Upper Glass Cover Plate Removed: Yes
• PC/PC-CF: Hotbed Temperature: 100~110℃, Glue Stick Required: Yes, Upper Glass Cover Plate Removed: No
• PA/PAHT-CF: Hotbed Temperature: 100~110℃, Glue Stick Required: Yes, Upper Glass Cover Plate Removed: No